US CHEMICAL & PLASTICS INC -- DURAGLAS, 24030, 24040, D-903, D-901 -- 8040-00F006041
===================== Product Identification ===================== Product ID:DURAGLAS, 24030, 24040, D-903, D-901 MSDS Date:01/01/1987 FSC:8040 NIIN:00F006041 === Responsible Party === Company Name:US CHEMICAL & PLASTICS INC/CANTON, OH 44702 Emergency Phone Num:(216) 455-4311 CAGE:DO723 === Contractor Identification === Company Name:U S CHEMICAL & PLASTICS Address:1446 W TUSCARAWAS ST Box:City:CANTON State:OH ZIP:44706 Country:US Phone:216-455-4311 CAGE:32882 Company Name:US CHEMICAL & PLASTICS Address:1446 WEST TUSCARAWAS ST City:CANTON State:OH ZIP:44706 Phone:903-885-7696 CAGE:DO723 ============= Composition/Information on Ingredients ============= Ingred Name:POLYESTER RESIN SOLUTION Fraction by Wt: <60% ACGIH TLV:100 PPM Ingred Name:GLASS, FIBROUS RTECS #:LK3651000 Fraction by Wt: <15% OSHA PEL:15 MG/M3 (DUST) ACGIH TLV:10 MG/M3 (DUST);9192 ===================== Hazards Identification ===================== Effects of Overexposure:SKIN & EYE: IRRITATION TO NOSE AND THROAT OR HEADACHE. ======================= First Aid Measures ======================= First Aid:INHALATION: MOVE TO FRESH AIR, GIVE OXYGEN OR ARTIFICIAL RESPIRATION. SKIN: WASH WITH SOAP AND WATER. EYE: WASH WITH EXCESS WATER AND CONSULT PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:83F TCC Lower Limits:1.1% Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL Fire Fighting Procedures:STYRENE WILL POLYMERIZE READILY AT ELEVATED TEMPERATURE. Unusual Fire/Explosion Hazard:IF THIS OCCURS IN CLOSED CONTAINERS, THERE IS POSSIBILITY OF VIOLET RUPTURE. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE CLOTHING. REMOVE ALL SOURCES OF IGNITION (FLAME, ELECTRICAL) VENTILATE AREA. SORB SPILLAGE WITH INERT MATERIAL SUCH AS VERMICULITE OR SAND, PLACE IN OSED CONTAINER FOR DISPOSAL. CLEAN AREA WITH NON-COMBUSTIBLE AND VENTILA. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T WELD OR FLAME CUT EMPTY CONTAINERS. STORE IN COOL, DRY PLACE AWAY FROM SUNLIGHT/IGNITIONTHER SOURCES OF HEAT & KEEP AWAY FROM OPEN FLAMES. Other Precautions:STORE AND HANDLE AS FLAMMABLE LIQUID. USE WITH ADEQUATE VENTILATION. AVOID INHALATION OF DUST-FORMED DURING SANDING OPERATIO ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE-SELF CONTAINED APPARATUS IF >100 PPM. Ventilation:LOCAL EXHAUST-MUST COMPLY WITH LOCAL REGULATIONS. Protective Gloves:NEOPRENE Eye Protection:SAFETY GLASSES Supplemental Safety and Health MSDS UNDATED. WT/GAL: 12-13.5 LBS/GAL ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>230F Vapor Density:>AIR Evaporation Rate & Reference:SLOWER THAN ETHER Percent Volatiles by Volume:<45% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES PEROXIDES OR OTHER OXIDIZING AGENTS. Stability Condition to Avoid:SUNLIGHT, OPEN FLAME & PROLONGED STORAGE >100F. Hazardous Decomposition Products:CO & UNKNOWN ORGANIC COMPOUNDS. Conditions to Avoid Polymerization:SUNLIGHT & CONTAMINATION & PROLONGED STORAGE >100F. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSAL MUST BE CARRIED OUT ACCORDING TO LOCAL,STATE AND FEDERAL, LAWS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.